PQ100 Tall (web)

The BGI PQ100 FRM Sampler incorporates BGI pioneering technology to meet the requirements for ambient particulate sampling dictated by the U.S. Environmental Protection Agency. This includes the design of PM10, PM2.5 and PM1 Inlets, volumetric sample flow rate control, data logging and software for report and data processing.

  • miniPMTM Inlet – Operate the PQ100 at sampling sites as high as 15,000 ft (4,572 meters)
  • EPA Federal Reference Method for PM10 (Designation No. RFPS-1298-124)
  • Optional solar panel can allow for indefinite operation without charging or connection to an AC power source
  • PQ100 complete sampling system includes the PQ100 pump, PM10 inlet and downtube, and rigid tripod
  • Only designated reference sampler capable of a 24 hour run on internal built-in 12 volt battery. Internal battery provides power during AC power outages meaning you never have sample interruptions.

Applications

  • Ambient PM10 Monitoring (RFPS-1298-124)
  • Fence Line Monitoring
  • Remediation Projects
  • Remote Site Monitoring
  • High Altitude Sampling (with patented miniPMTM Inlet)
  • Suitable for Lead, Asbestos, Oil Mists, Indoor Air Pollutants and Allergens

Features

  • Designated Federal Reference Method (FRM) for PM10
  • Volumetric Flow Control, using ambient temperature and barometric pressure compensated mass flow sensor
  • BGI designed Dual Diaphragm Vacuum Pump
  • Portable and only EPA designated sampler with solar augmentation approval
  • Only designated reference sampler capable of a 30 hour run on internal built-in 12 volt battery. Internal battery provides power during AC power outages meaning you never have sample interruptions.
  • Can be configured for PM10, PM4, PM2.5, PM1 and TSP for low or high altitude
  • PQ100 Pump can be used as an IAQ and special study flow controlled vacuum pump

Accessories

  • Solar Panel
  • Test Cassette
  • Cassette Transport Case
  • Cassette Opener
  • tetraCal or deltaCal flow calibrators

Specifications

PQ100 Weight: 19 lbs (8.62 kg)

PQ167 Weight: 34 lbs (15 kg)

PQ100 Pump Dimensions: 10 x 6 x 9.7 in. (25.4 x 15.2 x 24.6 cm)

PM10 Inlet Height: 16 in. (40.6 cm)

Tripod Height: 68 in. (173 cm)

Flow Control: 2 – 25 LPM

Flow Precision: ±2%

Data Output: RS232 connection

Regulatory Approval: EPA RFPS-1298-124 FRM for PM10

Internal Battery: 12V 12Ah short circuit protected

Charging System: 120 VAC (60 Hz) or 240 VAC (50 Hz)